steamcast - nsv encoder automate the capture

g00gle · Post by **g00gle** » Sat Mar 04, 2006 3:54 pm

Hello,
I would like to automate the capture using command line scripts. I am using steamcast in linux and trying to source from windows. I tried this command but video is going fine but no audio. Please help me how to configure/tune the audio.

nsvenc cap:1,0 sc:<steamcast_server_ip>:8000:headers.txt

If i do the same with NSVCap GUI it works. I checked the audio and video there seems to be correct. Any help would be appreciated.

I refered this forum
http://forums.winamp.com/showthread.php ... ost1040011

Post by **Jay** » Sat Mar 04, 2006 4:17 pm

if I remember correctly shouldn't you have your cap set to 1,1?

g00gle · Post by **g00gle** » Sat Mar 04, 2006 4:22 pm

Hi Jay,

The capture is decided in this format.

vid, aud ...i am capturing from my tvtuner so i gave 1,0. because i have only one audio capture device.

Post by **Jay** » Sat Mar 04, 2006 4:24 pm

and you are sure you only have one audio device? If you are streaming from a webcam or firewire device then it may have it's own handle.

g00gle · Post by **g00gle** » Sat Mar 04, 2006 4:29 pm

Here is what my command output:

J:\Steamcast>nsvenc /cfgcap cap:0,0 sc:myip.com:5055:headers.txt
NSVenc v0.80 (4/19/03) - Copyright (C) 2001-2003, Nullsoft Inc.
Available video capture devices:
0 ATI Bt829 Capture
1 VirtualCamera
2 Intel USB Video Camera III
3 Luminositi Softcam [VFW]
Available audio capture devices:
0 VIA AC'97 Audio (WAVE)
Dshow: reported input fps=13.999994
DShow: error starting capture.

I am capturing from my tv tuner which is option 0.

Thanks

Post by **Jay** » Sat Mar 04, 2006 11:19 pm

hmm that odd, the tuner I have has it's own audio handle but if it worked in NSVcap then something is different, in NSVcap do you just specify that device and it works fine? You may want to hit up the NSV forums at winamp. As nsvenc is their product. Something buggy between nsvenc and nsvcap or some setting is different.