Multiple Mount problems
Multiple Mount problems
I am having problems adding more then 5 mounts.
Is there a limit?
I see them on the admin page but when I try to push the encoder to the mount I get a "Source Login Invalid" in the log file.
(Encoder = Orban Opticodec SE)
---My Full Conf---
----End Conf ----
Thanks
John
Is there a limit?
I see them on the admin page but when I try to push the encoder to the mount I get a "Source Login Invalid" in the log file.
(Encoder = Orban Opticodec SE)
---My Full Conf---
Code: Select all
PortBase=7998
MaxUser=1300
IPMaxUser=1
LogFile=steamcast.log
ScreenLog=No
RealtimeLog=No
YPLog=Yes
PidFile=steamcast7998.pid
NameLookups=No
ShowLastSongs=1
ClientTimeout=30
AdminUser=blaa
AdminPass=blaa
;=====================
;1ST Encoder/Mount(Relay)
;=====================
SourceMount=/live.mp3
SourceUser=Encoder
SourcePass=password1
SourceUserMax=1000
SourceRelay=192.168.1.1:7998
SourceIsSC=Yes
SourceIsDefault=Yes
SourceAuth=No
SourcePublic=Default
SourcePublicRelays=Yes
SourceBuffUtil=100
ThreadPool=4
;=====================
;2ND Encoder/Mount(Relay)
;=====================
SourceMount=/128k.mp3
SourceUser=Encoder
SourcePass=password2
SourceUserMax=5
SourceRelay=192.168.1.2:8000
SourceIsSC=Yes
SourceIsDefault=No
SourceAuth=Yes
SourceAuthMax=1
SourceBuffUtil=100
;=====================
;3RD Encoder/Mount(Live)
;=====================
SourceMount=/stream.aac
SourceUser=Encoder
SourcePass=password3
SourceUserMax=5
SourceIsSC=Yes
SourceIsDefault=No
SourceAuth=Yes
SourceAuthMax=1
SourceBuffUtil=100
;=====================
;4th Encoder/Mount(Live)
;=====================
SourceMount=/mobile.aac
SourceUser=Encoder
SourcePass=password4
SourceUserMax=5
SourceIsSC=Yes
SourceIsDefault=No
SourceAuth=Yes
SourceAuthMax=1
SourceBuffUtil=100
;=====================
;5th Encoder/Mount(Live)
;=====================
SourceMount=/hitest.aac
SourceUser=Encoder
SourcePass=password5
SourceUserMax=5
SourceIsSC=Yes
SourceIsDefault=No
SourceAuth=Yes
SourceAuthMax=1
SourceBuffUtil=100
;=====================
;6th Encoder/Mount(Live)
;=====================
SourceMount=/lowtest.aac
SourceUser=Encoder
SourcePass=password6
SourceUserMax=5
SourceIsSC=Yes
SourceIsDefault=No
SourceAuth=Yes
SourceAuthMax=1
SourceBuffUtil=100
;=====================
;7th Encoder/Mount(Live)
;=====================
SourceMount=/phone.aac
SourceUser=Encoder
SourcePass=password7
SourceUserMax=5
SourceIsSC=Yes
SourceIsDefault=No
SourceAuth=Yes
SourceAuthMax=1
SourceBuffUtil=100
;=====================
; Directory Configuration
; =======================
Directory=http://www.steamcast.com/sbin/yp.php
Thanks
John
All Password are different for every mount but the usernames are the same.Jay wrote:double check your configuration and make sure that no username and passwords are duplicated.
I will try and changing them all and see what happens.
Also in the opticodec settings I don't have a spot for username unless I use the Ultravox server settings.
But that does not work at all with steamcast.
It happens from Mount 5 to mount 7Jay wrote:Is this happening on all mounts or just some, if just some which ones?
Changing the order of the encoders still has the same effect on mounts 5 to 7.Jay wrote: Also, does changing the encoder's connect order switch the effected mount points?
In fact when I disconnect all encoders and try to connect to mount 5 to 7 I get the same error.
Ok I changed all of the "SourceUser" names and still have the same problem.
I also tried changing the "SourceIsSC=Yes" to No and still the same thing "Source Login Invalid"
BTW I am using the Icecast2 server setting in Opticodec.
It has a Shoutcast server setting but when I try that I get:
"Invalid login on source channel mount7pass; mainpass;
Hope this helps.
I also tried changing the "SourceIsSC=Yes" to No and still the same thing "Source Login Invalid"
BTW I am using the Icecast2 server setting in Opticodec.
It has a Shoutcast server setting but when I try that I get:
"Invalid login on source channel mount7pass; mainpass;
Hope this helps.
Ok copied 7 and moved to before 3 and it works fine then moved 3 to where 7 was and no connect on 3 now (at end of config)Jay wrote:Try swapping the configuration order, move mount 7 to mount 3's position in the config file and let me know if that allows you to use mount 7 again.
Well that only happens when I try to connect using the Mount 7 password while in opticodec Shoutcast server mode.Jay wrote: Also have you tried using the administrators pass on that mount that passes back the admin pass?
I think it's trying to connect to the default mount (mount 1).
This is a new server for me and I will be switch all of my streams to this one. I have the whole server to myself so I can try anything you want!