Steamcast Support (Split from Radio Toolbox v1.1.1 Released)

furie · Post by **furie** » Tue Jan 04, 2005 3:54 pm

Jay wrote:An update has been made to Radio Toolbox to include Icecast 2.2.x branch support and Steamcast support.

Change Log for Radio Toolbox

Legend
======
* Modified/Fixed
+ Added
- Removed

1.1.1
=====
* Updated Icecast2 compatibility to the 2.2.x branch
+ Added support for Steamcast servers

Go get it at http://www.radiotoolbox.com/downloads/

You indicate that you added support for Steamcast Servers but I don't seem be able to be seen and I webcast through Steamcast at the following IP : http://lebec.dynip.com:8350/

Post by **Jay** » Tue Jan 04, 2005 3:59 pm

You must have Steamcast 0.9.61

You are current running Steamcast 0.9.6

Get the latest Steamcast version from www.steamcast.com

furie · Post by **furie** » Tue Jan 04, 2005 6:48 pm

Jay wrote:You must have Steamcast 0.9.61

You are current running Steamcast 0.9.6

Get the latest Steamcast version from www.steamcast.com

Thank you! I'll check that right away if there is a problem I'll come back to you. Thanks again

furie · Post by **furie** » Wed Jan 05, 2005 1:25 am

furie wrote:
Jay wrote:You must have Steamcast 0.9.61

You are current running Steamcast 0.9.6

Get the latest Steamcast version from www.steamcast.com
Thank you! I'll check that right away if there is a problem I'll come back to you. Thanks again

I have installed Steamcast 0.9.61 but it still does the same thing to me, as per attached image: http://lebec.dynu.com:90/radiotoolbox.jpg

Post by **Jay** » Wed Jan 05, 2005 2:10 am

that url doesn't work for me, could you place it somewhere public or try your best to describe the problem?

furie · Post by **furie** » Wed Jan 05, 2005 12:39 pm

Jay wrote:that url doesn't work for me, could you place it somewhere public or try your best to describe the problem?

OK here's another URL to pick up the image http://lebec.2y.net:90/radiotoolbox.jpg Hope this one will work!

Post by **Jay** » Wed Jan 05, 2005 5:16 pm

You need to specify the mount, for example:

http://ip.address:port/live.mp3

furie · Post by **furie** » Thu Jan 06, 2005 2:03 am

Jay wrote:You need to specify the mount, for example:

http://ip.address:port/live.mp3

How can I use the mount when I use Shoutcast Source to webcast as per the following image http://lebec.2y.net:90/RadioToolbox2.jpg The port being on 8350 it automatically starts the Steamcast Server also set to port 8350
It does the same for the Shoutcast Server (port 8250) and the Peercast Server (port 7144) that are outputs 1 and 2
The funny part of it all is that RadioToolbox sees the server as being "offline" but anyone can connect to it through http://lebec.dynip.com:8350/listen.pls
See copy of the administration panel from Steamcast http://lebec.2y.net:90/radiotoolbox3.jpg

Post by **Jay** » Thu Jan 06, 2005 2:26 am

Steamcast is not a shoutcast server in that it has the capability of handling more then one source. You simply are running in shoutcast compatibility mode which means that people can connect to one of your sources via the index like a shoutcast server. The stats generated by steamcast are still mount specific. You can find the sourcemount name by looking in the configuration file for sourcemount= of by logging into the webpanel admin page and looking at the source table. The mount is the second column.

by default it is live.mp3 so if you never set one then try using /live.mp3

You can also setup multiple source and mount points by adding more SourceMount= to your configuration file.

As far as the what source you use, Steamcast is agnostic when it comes to the source. It will use the username or password in this case to align the source to a particular mount.

furie · Post by **furie** » Thu Jan 06, 2005 2:38 am

Jay wrote:Steamcast is not a shoutcast server in that it has the capability of handling more then one source. You simply are running in shoutcast compatibility mode which means that people can connect to one of your sources via the index like a shoutcast server. The stats generated by steamcast are still mount specific. You can find the sourcemount name by looking in the configuration file for sourcemount= of by logging into the webpanel admin page and looking at the source table. The mount is the second column.

What bothers me is that it works perfectly and the server can be seen both by Shoutcast and Steamcast directories. In fact the only drawback for me is that it does not appear to be on line with RadioToolbox. What should I change for it to work? Not use the Shoutcast Source? But it is so useful and trouble free that way! It starts all the servers without any problems and they are seen to users where they should be seen in each directory where they should be listed !!! If it's only RadioToolbox that does not accept it that way is it worth while changing the setup?

Post by **Jay** » Thu Jan 06, 2005 5:27 pm

As I said Steamcast doesn't work it's stats that way. You have to specify the mount point. Also you should notice that steamcast and icecast's yp directories are also using the mount point? Why should you change anything but Radio Toolbox? Just add the mount point and all will work fine. Steamcast doesn't need to be changed.

Steamcast Support (Split from Radio Toolbox v1.1.1 Released)

Re: Radio Toolbox v1.1.1 Released!!!